-
Characteristics of aluminum cold forging and lubrication methods used in the processTime of issue : 2021- 11-09
Aluminum cold forging refers to the forging and extrusion of the blank at room temperature. The utility model has the advantages that the surface roughness of the product is low, and the strength of the product is also improved due to the strengthening effect of deformation.
-
How to prevent the cold insulation of gravity casting?Time of issue : 2021- 11-09
In today's forging parts, if the temperature is not well controlled or careless in the production process will cause a series of defects, which will greatly reduce the quality of forging parts.
-
Heat treatment characteristics of aluminum alloys strength of pure aluminumTime of issue : 2021- 11-09
Aluminum, a metal, is often seen in our daily life. The strength of pure aluminum is very low, only about 9 kg / mm2. Therefore, pure aluminum can not be used to manufacture structural parts bearing load, and alloy must be synthesized.
-
How about the appearance quality of die forgings?Time of issue : 2021- 11-09
In case of crack, folding, forging injury, interlayer, scab, slag inclusion and other defects on the forging surface, the following provisions shall be followed.
-
What is the standardization of hydraulic equipment forgings?Time of issue : 2021- 11-09
Forging plant: the standardization of hydraulic equipment forgings is the development trend of forging technology.
-
Application fields and specific cases of cold extrusion technologyTime of issue : 2021- 11-09
Cold extrusion refers to putting the metal blank into the die cavity in the cold state, forcing the metal to extrude from the die cavity under the action of strong pressure and certain speed, so as to obtain the extrusion parts with required shape, size and certain mechanical properties. Obviously, the cold extrusion process depends on the die to control the metal flow and the large transfer of metal volume to form parts. It is an important part of precision plastic volume forming technology.
-
What improvements should be made in the production process of forged partsTime of issue : 2021- 11-09
In today's forging parts, if the temperature is not well controlled or careless in the production process will cause a series of defects, which will greatly reduce the quality of forging parts. In order to eliminate this defect in forging parts, metal parts must be improved first to avoid the sensitive working pressure of steel parts in the whole forging process, which can increase the relative density of metal materials, It not only makes it less and less smooth and fine, but also makes it a high aluminum alloy. When carburizing in alloy steel, its body shape is broken.
Dalian Dongxing Forging Co., Ltd.
The main products are bearing ring forgings for metallurgy, mining and various machinery industries, and all kinds of small and medium-sized forgings.
Add: Dalian Jinpu New Area
Tel: +86-411-87350155
If you have any questions, please contact us
Our Strength
Copyright: Dalian Dongxing Forging Co., Ltd. 辽ICP备********号-1 Powered by www.300.cn